Embedded Developer

Hardware setup  If you didn't already seen here are two tutorial how to work with PX4 Autopilot: PX4 development - building, flashing and debugging with debugger (like a PRO) PX4 development - building, flashing and debugging without debugger (Arduino developers style) If you work or you are planning to work with PX4 and if you didn't use debug serial console connection before, I recommend it. The advantage is that you will be able to see if everything boots properly after your changes. Another thing is you can write direct commands over it so you don't need to use QGroundcontrol and MAVLink console. It is useful to have one of those boards:

 This is the next tutorial that brings a bit more expertise into PX4 Autopilot debugging from an embedded software developer perspective. It will explain how to use J-Link debugger to debug PX4 Autopilot code in Eclipse IDE. If you didn't already see the previous tutorial, please go there, first phase of PREPARING is mandatory to be done so we can continue here. Link to previous tutorial: https://igor-misic.blogspot.com/2022/06/px4-development-building-flashing-and.html Everything in this tutorial is tested and reproduced at Kubuntu 22.04 LTS (It works the same for Ubuntu as well).

 This is a short tutorial that will explain how to build PX4 Autopilot, flash and debug it at the PX4 FMU (Flight Management Unit) without a debugger. Everything in this tutorial is tested and reproduced at Kubuntu 22.04 LTS (It works the same for Ubuntu as well). Preparation Let's start with cloning PX4 Autopilot > git clone https://github.com/PX4/PX4-Autopilot.git After the repository is cloned make sure you initialize all submodules. You would like to keep using this GIT commands when you jump between branches in PX4, otherwise, you can experience issues like missing modules while building. > cd PX4-Autopilot > git submodule sync > git submodule update --init --recursive And that is it we are almost ready to build our PX4 firmware. You need to know what board (FMU) you possess. Let's guess you have Pixracer. Pixracer is fmu-v4 board. Figure 1 - px4_fmu-v4 board source tree